
A roll's nominal surface area is not the same as the area of pipe it will cover after spiral wrapping. Overlap puts part of each turn onto the preceding turn. That material is doing useful work, but it must be included in the estimate.
Begin with the specified application
Record the pipe outside diameter, coated length, tape width, roll length, and required overlap for each layer. Use the approved Polyken procedure for the selected system. A quantity calculation should follow the coating design; it should not determine a reduced overlap just to make the available rolls last.
A simple planning example
For a long, uniform wrapped area, 50 percent overlap gives approximately half the nominal tape area as net coverage for that wrapping pass. A roll containing 100 square feet of tape would therefore cover roughly 50 square feet before allowances for starts, ends, geometry, and waste. This is an estimating illustration, not an instruction to apply every Polyken product at 50 percent overlap.
Calculate the inner corrosion layer and outer protection layer separately. Different widths, roll sizes, or application details can produce different roll counts even when both layers cover the same pipe.
Include the work that a flat-area calculation misses
- Starts, terminations, and transitions onto existing coating.
- Bends, fittings, and other changes in geometry.
- Separate repair materials and liquid adhesive.
- A project-approved allowance for handling loss and contingency.
Keep the theoretical quantity and the ordering allowance visible as separate figures. That makes a later field quantity change easier to explain.
Review the manufacturer's Polyken product documentation. Send JSI the coating specification and dimensions for help assembling a material inquiry.
Contact Joint Specialists Inc.
For product selection assistance, pricing, or availability, contact:
Steve Simpson
Joint Specialists Inc.
Phone: 936-321-3333
Email: steve@jsicoatings.com
Website: www.heatshrinksleeves.com
Joint Specialists Inc. — Providing pipeline corrosion prevention solutions since 1995.
Comments
Post a Comment