Covalence TPS: Why a Tubular Sleeve Changes the Joint Assembly Sequence

Covalence TPS tubular sleeve with packaged inventory at JSI

A tubular shrink sleeve has to be in the right place before the completed pipe weld prevents it from being slipped over the pipe. That simple sequencing point is one of the most useful differences to discuss when planning a Covalence TPS job.

Understand the sleeve format

TPS is a tubular heat-shrink sleeve used for pipeline field joint corrosion protection. Unlike a wraparound assembly, it begins as a continuous tube. The crew therefore needs a plan for positioning it before the joint is made, then keeping it clear of the work until installation.

This is a planning issue as well as an installation issue. Welding, inspection, surface preparation, and sleeve application may involve different people. Everyone needs to know when the sleeve is placed and how it will be protected while the joint progresses.

Confirm fit and access early

Provide the pipe outside diameter, existing coating, joint details, and available clearance. Confirm the selected TPS size and application instructions rather than assuming the nominal pipe size alone defines the correct sleeve.

  • Identify the required tubular sleeve before assembly starts.
  • Assign responsibility for pre-positioning and protecting it.
  • Coordinate welding and inspection access.
  • Use the current TPS procedure for final preparation and recovery.

When should a wraparound option be discussed?

If the pipe is already assembled or access prevents tubular positioning, raise that limitation during product selection. A wraparound option requires its own suitability review; it should not be substituted informally after the crew reaches the joint.

Review JSI's TPS product information and installation resources. Send JSI the assembly sequence and pipe details when requesting assistance.

Contact Joint Specialists Inc.

For product selection assistance, pricing, or availability, contact:

Steve Simpson
Joint Specialists Inc.
Phone: 936-321-3333
Email: steve@jsicoatings.com
Website: www.heatshrinksleeves.com

Joint Specialists Inc. — Providing pipeline corrosion prevention solutions since 1995.

Comments