A casing seal inquiry needs two pipe diameters and an understanding of the transition. The casing and carrier pipe form different surfaces, and their arrangement matters.
Describe the step-down
Covalence Caseal is a wraparound heat-shrink sealing system for casing-to-carrier transitions. Its product literature describes a reinforced backing and a closure arrangement intended for that geometry. It should be selected from the actual application dimensions.
Measure the outside diameter of the casing and the outside diameter over the carrier coating. Show how far the carrier extends, whether the pipes are concentric, and what access is available around the full circumference.
Show the surfaces being sealed
Identify the coating on both surfaces and note contamination, damage, welds, or irregular features near the intended sealing area. Include photographs from the side and end of the assembly. A drawing with dimensions helps make those photographs useful for a product inquiry.
- Casing outside diameter and carrier coated outside diameter.
- Available axial space on both sides of the transition.
- Coating types and surface condition.
- Obstructions, eccentricity, and installation access.
Confirm the supplied construction
Review the exact Caseal designation, kit components, and installation instructions with the proposed supply. Sealing a casing end is a different task from coating an ordinary girth weld, so a field joint sleeve should not be substituted based only on its ability to shrink.
Visit JSI's Caseal page and send the transition dimensions for pricing and product selection assistance.
Contact Joint Specialists Inc.
For product selection assistance, pricing, or availability, contact:
Steve Simpson
Joint Specialists Inc.
Phone: 936-321-3333
Email: steve@jsicoatings.com
Website: www.heatshrinksleeves.com
Joint Specialists Inc. — Providing pipeline corrosion prevention solutions since 1995.

Comments
Post a Comment