
The wear cone is an important component in the Covalence DIRAX system because the leading edge of a sleeve encounters obstacles first during HDD pullback. Its orientation and installation belong in the coating plan before the pipe is ready to pull.
DIRAX is a fiber-reinforced heat-shrink sleeve system designed for field joint corrosion protection in directional drilling applications. Product selection should address the complete joint system, including its installation details.
Why the leading edge deserves attention
As a coated joint moves through a bore, the transition at the front of the sleeve may contact soil, rock, and other material. Identifying the pull direction helps the crew establish which edge is the leading edge.
Review that direction during planning, especially when drawings, staging, or handling arrangements change. The installation detail should be clear to the people applying and inspecting the system.
How the DIRAX components work together
JSI's DIRAX product information describes a system incorporating S1301M liquid epoxy, a heat-shrink sleeve, and a wear cone applied over the sleeve's leading edge. The manufacturer's product description identifies fiberglass reinforcement as a means of improving the backing's abrasion and gouge resistance.
Those components need to be considered together. A photograph of a finished sleeve cannot establish whether the complete system underneath and at the leading edge was installed correctly.
Questions to resolve before application
- Which DIRAX product and coating configuration does the specification require?
- What factory coating and pipe outside diameter are involved?
- Which direction will the pipe travel during the pull?
- What preparation, epoxy application, sleeve placement, and wear-cone details are required?
- What inspection and handling-release criteria apply before pullback?
Can the wear-cone detail be improvised?
Use the current installation instructions and approved project procedure. The correct cut dimensions, orientation, overlap, and heating sequence are product and application details that should be confirmed before the crew begins.
Visit JSI's DIRAX product page for data sheets, installation information, and related resources. Contact Joint Specialists Inc. with the pipe coating, joint dimensions, and crossing details for product selection assistance and pricing.
Contact Joint Specialists Inc.
For product selection assistance, pricing, or availability, contact:
Steve Simpson
Joint Specialists Inc.
Phone: 936-321-3333
Email: steve@jsicoatings.com
Website: www.heatshrinksleeves.com
Joint Specialists Inc. — Providing pipeline corrosion prevention solutions since 1995.
Comments
Post a Comment