
ScarGuard helps protect pipeline field joint coatings from abrasion and gouging during horizontal directional drilling (HDD). It adds a fiber-reinforced composite layer over a suitable underlying coating, helping that corrosion protection system withstand the installation process.
A field joint needs protection for two different stages: the trip through the bore and the years of service that follow. Evaluating both stages before construction helps owners and contractors choose a complete coating system.
Why HDD field joints need attention
Field joints connect sections of factory-coated pipe. Their coatings are applied in the field, and transitions between coating sections can create areas that deserve particular attention during pullback. Rock, abrasive soils, and contact inside the bore can challenge the coating surface.
The practical question is whether the specified joint coating also provides the mechanical protection needed for the crossing. Pipe diameter, existing coating, bore conditions, and the installation plan all belong in that discussion.
Where ScarGuard fits in the coating system
ScarGuard is a mechanical protection system. It works with the specified corrosion coating underneath it. Selecting an overcoat does not remove the need to prepare the substrate, install the joint coating correctly, or inspect it before it is covered.
The manufacturer documents ScarGuard use over field joint coatings in demanding HDD work, including a Rocky River crossing in North Carolina. That example demonstrates an application, rather than establishing one configuration for every bore.
What to confirm before ordering
- The underlying coating and its compatibility with the proposed protection system.
- The pipe diameter, protected area, and required material quantity.
- The approved installation procedure, layer configuration, and release criteria.
- The time available for application and curing before handling and pullback.
Does ScarGuard replace the field joint coating?
No. Treat the corrosion coating and the mechanical protection as parts of one specified system. Joint Specialists Inc. can help discuss the product information needed for your crossing.
Review the manufacturer's ScarGuard HDD case study and explore JSI's pipeline coating products. Send us the coating specification and crossing details when requesting assistance.
Contact Joint Specialists Inc.
For product selection assistance, pricing, or availability, contact:
Steve Simpson
Joint Specialists Inc.
Phone: 936-321-3333
Email: steve@jsicoatings.com
Website: www.heatshrinksleeves.com
Joint Specialists Inc. — Providing pipeline corrosion prevention solutions since 1995.
Comments
Post a Comment