Need pricing, availability, or help with your application?
Steve Simpson — Joint Specialists Inc.
Phone: 936-321-3333
Email: steve@jsicoatings.com
Website: www.heatshrinksleeves.com

Break the assembly into measurable sections
List straight cylindrical areas, bends, branches, and other components separately. Mark the limits of coating and distinguish bare steel from transitions onto retained coating. A marked-up drawing gives the estimator and applicator a shared basis for the calculation.
Where geometry is difficult to measure directly, have the responsible project personnel agree on the estimating method. Keep that assumption visible instead of presenting an uncertain area as an exact field measurement.
Apply the correct thickness basis
Use the specified Powercrete product and its documented coverage or material-volume information. The required film thickness belongs in the calculation from the beginning. A coverage rate from another coating is not a reliable substitute.
- Identify the product and application method.
- Calculate coated area by component.
- Use the project-required thickness.
- Show the field allowance separately.
Consider access and package size
Working around the back of a fitting or inside a crowded piping assembly can affect the pace of application. Discuss the work pattern when choosing kit or cartridge quantities so material can be prepared and used within the applicable procedure.
Send JSI the dimensioned drawing, product specification, and target thickness. See JSI's Powercrete information for product resources and contact details.
Questions about pricing, availability, or the material for your job? Call 936-321-3333 or email steve@jsicoatings.com. Send the drawing or a few photos if you have them—we can start there.
Joint Specialists Inc. — Providing pipeline corrosion prevention solutions since 1995.
Comments
Post a Comment