Pipe Coatings IN STOCK!

 Pipe Coating Materials IN STOCK 

Same Day Shipping Available

"DO YOU HAVE PRODUCT _______ IN STOCK????"

     That right there ^ is by far the most common question I receive from folks.  In the pipeline world, the products that we are are often the very last item purchased for a project (and too often, pipe is already welded and crews are standing around before we are called."  So - here is a list of the different products that we stock at our facility in Conroe, TX.  I'll give a very brief (hopefully only 1 line) description of each product.  

WPCT - in 11", 17", 24" and 34" widths.  WPCT is a standard wrap around shrink sleeve designed for use on pipelines that will operate at or below 140F.

WPCPIV - in any width you'd like.  WPCPIV is the closure strip that holds shrink sleeves together during the installation process.

WPC120 - in 11", 17, 24" and 34" widths.  WPC120 is rated for use at 251F.

WPC100M - in 11", 17", 24" and 34" widths.  WPC100M is rated for use at 176F (212F offshore)

WCSM - heavy wall heat shrink tubing rated for use at 1000 volts for cables.  We stock:  12/3; 16/4; 24/6; 34/8; 48/12; 56/16; 70/20.  We stock all in 4 foot lengths; but can supply you with a custom length if needed.

TWDB - 3" and 4" wide in 165 foot rolls.  Thermofit Wraparound Duct Bands for high velocity industrial HVAC systems and vent hoods.

TPS - Tubular Pipe Sleeve (slip on) for 2", 2.5", 3.5", 4.5", 6" and 8" pipe.  Rated for use at 140F.

S1301M Epoxy Primer - two part epoxy component of many Covalence shrink sleeve systems.

DIRAX - in 3", 12", 17", 24" and 34" widths.  The best product for road bores, directional drilling applications, pilings, etc.

Powercrete R95 - the High Build Epoxy - 2# kits, 4# kits, 50ml repair cartridges -- and custom kit sizes available.

Powercrete R65/F1 - the Fast Cure Epoxy - 1# kits, 2# kits, 4# kits, 50ml repair cartridges and 400ml spray cartridges available.  In addition - we can offer you a custom kit sizes for your next project.

Powercrete J - The Original Road Bore Epoxy - 2# kits, 4# kits, 10# kits.  In addition - we can offer you a custom kit sizes for your next project.

PERP - Polyethylene Repair Patch for repairing damage to PE coatings.

MWTM - medium wall shrink sleeve for cables.  We stock:  16/8; 50/16, 85/25

HTLP80 - 11", 17", 24" - three layer PE system for lines operating at up to 176F

HTLP60 - 11", 17", 24" - three layer PE system for lines operating at up to 140F

GHFC - snap on seal for cable splices

GelWrap - 18/4-100 - snap on seal for cable splices

Flexclad - 2" wide, 3" wide and 4" wide - heat shrinkable tape sold in 50 foot rolls

5# FBE Repair Sticks - green FBE repair sticks that are commonly used (though I recommend you use Powercrete R65/F1 50ml cartridges instead -- they are dramatically superior in every technical way.

CS / Caseal - high expansion material for sealing between a carrier pipe and a casing pipe

FS / Flangeseal - high expansion material for sealing a buried flange.

CPSM 195/102-1500/87 - high expansion tube supplied at 7.67" that will shrink down to 4".

BPTM 30/12; 50/20; 100/40 - busbar insulation tubing

ASE-4 - Anode Splice Encapsulation Kit

AC - Anode Sealing Caps for 2", 3" and 4" anodes.

BBS - bundled bumper system for protecting lines during a multi-pipe pullback for pipelines 8" and larger.

BBS/CCS - bundled bumper system for protecting lines during a multi-pipe pullback for pipelines less than 8"