Anode Splice Encapsulation Kit

 ASE-4 Anode Splice Encapsulation Kit

Cross section drawing of how ASE-4 seals between 2 cables

     Raychem's Anode Splice Encapsulation Kit is a heat shrinkable sleeve internally coated with with self encapsulating adhesive that enables it to completely insulate and seal such connectors as the standard split bolt and compression connector.

    The ASE is designed specifically for protecting anode splice connections of HMWPE, HDPE and Raychem Permarad cables (<--obsoleted), used in impressed current cathodic protection systems.

    Simplicity of design enables rapid and reliable installation.  A single splice encapsulation kit covers many cable sizes while eliminating time-consuming taping as well as compound mixing and curing.  The kits can be installed in approximately 3 minutes at temperatures as low as -40F.

    ASE splice encapsulation can be direct buried immediately after installation.  The completed encapsulation is mechanically strong, electrically insulated and sealed from moisture and contamination.