High Temp Heat Shrink for Pipelines
 |
| Covalence WPC120 |
In the world of pipeline coatings, many different factors are important criteria for selecting the proper external corrosion prevention coating for your project. These can range a great deal, depending on the priorities for the engineers associated with any given pipeline project. One thing never changes though: the pipe coating must be compatible with the operating temperature of the pipeline.
Elevated temperatures on pipelines can present quite a challenge to pipeline coatings. Elevated temperatures can make some products become brittle. High temperatures can make adhesives and sealant soften, leading to reduced peel, sheer and penetration resistance. Temps can also lead to cracking and worse cathodic disbondment results. "What is the operating temp of the line once it is in service" is almost always my starting point when working with someone to be sure our products are properly specified.
Covalence WPC120 is a heat shrink sleeve rated for use on pipelines operating at up to 251F. WPC120 can also be used on pipelines operating at something less than 251; that is just the maximum. Available in sleeve widths of 11", 17", 24" or 34" (can also offer custom widths as needed) it is the perfect selection for pipelines operating at high temps.
Though WPC120 is not compatible with factory coated PP; with a few modifications, it becomes a sleeve system called PPS120 that can. Give me a call so we can discuss your next project! Steve - 936/321-3333
No comments:
Post a Comment