Visit our website:
Call: (936) 321-3333

Thursday, January 2, 2014


Perp-Meltstick Coating Repair Stick

Repair System for Damaged Mill-applied PE coating.
Product Description: PERP MELTSTICK coating repair.

PERP MELTSTICK is a heat-sensitive, PE copolymer-based stick used for small super-ficial,
damage (scratches) to PE-coatings where the damage does not extend to the bare metal.

Installation is done with a standard gas torch. After eliminating all sharp edges, cleaning and preheating, PERP-MELT-STICK is heated above the damaged area until becoming glossy. No filler is required. The molten adhesive is spread onto the scratches, forming a tight bond with the substrate. After cool down, the hardening adhesive is smoothed flush with the PE line coating using a paint scraper.

Product Features/Benefits:
  • Versatile and adaptable repair system that is highly economical.
  • Resistant to high shear forces with durable reconstruction of the damaged coating.
  • Excellent adhesion to commercial PE mill-applied coatings. Guarantees a virtually monolithic coating repair of high quality.
  • Simple stick form makes installation faster and more convenient - saves time.
  • No special equipment required makes installation fast and easy while keeping installation costs low.

Product Properties Guide

Max operating temperature: 80°C (176°F)
Compatible line coatings: PE
Min preheat temperature: 60-70°C (140-158°F)
Recommended pipe preparation: Brush
Soil stress restrictions: None
Length: 12.0 inches
Diameter: 1.0 inch
Softening point: 120°C (248°F)
Shear strength:  750 psi @ 23°C (73°F); 65 psi @ 80°C (176°F)

No comments:

Post a Comment