Heat Shrink for Wire Line

 Heat Shrink for Down Hole Wire

Raychem WCSM for Down Hole Wire

     Raychem's WCSM product is a heavy wall (thick) heat shrinkable tube that is coated with an internal sealant.  This can be used in two different scenarios:

• WCSM to seal up the area where the cable was spliced
• WCSM to repair external damage to the cable

     In both cases, WCSM is a very quick installation with minimal steps or prep work.  Installed with a propane torch or industrial heat gun; the wire splice is sealed up and ready to go in seconds.  The cable can see the forces of going underground as soon as the sleeve has cooled to ambient temperatures -- and it can be quench cooled if you need to move even faster!

     Rated for use on lines that will carry 1000 volts or more; Raychem's WCSM is the perfect product for many, many different applications in the construction and electrical industries.  In cases where the WCSM is being used as a jacket repair; that electrical limit is even higher.

     WCSM is available in many different sizes; for different cable sizes and is available in practically unlimited lengths,  If you need 6 inch sections, no problem.  If you need 48" sections, no problem.  We can do exactly what it is that you need.