Powercrete Product Breakdown
 |
| From top to bottom: J, R65/F1, R95 |
In the Powercrete world, what once started as Powercrete-DD has (over time) expanded into an entire product line, offering multiple different product for many different pipeline operating conditions. For a summary see below; but if you have questions: much better to call or email: 936/321-3333 or steve@jsicoatings.com
Powercrete J
The original! When you think of Classic Coke (if you're old like me) it brings a certain sense of 'premium' with it. Powercrete J is similar -- it is the original Powercrete product for coating field joints of lines that will be involved with road bores and directional drills; though it also excels as a standard field joint coating on non bore field joints.
Powercrete R65/F1
This is the Powercrete product that is typically thought of as the "fast cure" or "cold weather" epoxy. Available in 1 pound, 2 pound, 4 pound or custom kit sizes, Powercrete R65/F1 could be just what your project needs.
Powercrete R95
This is considered the Powercrete "high build" epoxy. With 40 mils achievable in a couple of quick passes, Powercrete R95 is also approved for use on lines operating at elevated temps up to 95C.
Powercrete R120
A high temp, high build epoxy rated to 120C.
Powercrete R150
A high temp, high build epoxy rated to 150C
Powercrete repair cartridges
Powercrete R65/F1 is available in 50ml 1:1 cartridges that are perfect for completing pinhole and other small damage to any epoxy pipe coating.
Powercrete Spray Cartridges
Powercrete R65/F1 is also available in 1:1 spray cartridges; with 400ml cartridges being the most common. This product sprays absolutely beautifully.
No comments:
Post a Comment