Lead Time for Powercrete Products

A pallet of Powercrete J - 192 kits per pallet!

     Since field joint coatings are so often one of the last things purchased (often even after pipe has been welded up), I'd say that "what is the lead time" is one of the most common questions that I get.  Well I have good news:  95% of orders placed with us for Powercrete ship within 1 day.  we have a lot of stock here that is palletized, kitted, labeled and ready to go.  Beyond that; we have plenty of drums here so that we are in a position to make thousands more kits per day if necessary.  

    So what products do we specifically have available?

Available for immediate shipment:

- Powercrete J 2#

- Powercrete J 4#

- Powercrete R65/F1 1#

- Powercrete R65/F1 2#

- Powercrete R65/F1 4#

- Powercrete R65/F1 50ml Repair Cartridge Case

- Powercrete R95 2#

- Powercrete R95 4#

Beyond that; within one day we can ship:

- Powercrete R65/F1 400ml Spray Cartridges

- Powercrete J in custom kit sizes

- Powercrete R65/F1 in custom kit sizes

- Powercrete R95 in custom kit sizes

Give us a call or send an email so we can give you pricing on your next project! 

936/321-3333 or steve@jsicoatings.com

Powercrete Spray Cartridges

 Spraying Powercrete Epoxy (R65/F1)  

Powercrete R65/F1 400ml Cartridges

A beautiful coat of Powercrete R65/F1 being sprayed onto the pipe.

Powercrete R65/F1 400ml Cartridge - ready to spray!

     Powercrete R65/F1 is sometimes called "F1" and sometimes called "R65" - either name is acceptable.

     Powercrete R65/F1 is available to spray using 400ml cartridges (that is 400ml of material per cartridge).  Offering the same technical properties as the hand applied R65/F1, this spray option offers lower labor costs and less waste than some hand applied kits.

     Technically, Powercrete R65/F1 is a fast curing modified epoxy designed specifically for mainline and field joints coating on steel pipelines.  It can also be used for pipeline rehabilitation.  In addition, R65 is a 100% solids liquid epoxy coating with a fast cure time for effficient, user friendly applications.  Powercrete F1 can be applied to bare steel, FBE, or other epoxies.  

     Sold in cartridges with a 1:1 ratio, Powercrete R65/F1 is applied onto a grit blasted pipe surface.  The typical specified coating thickness required can range from 25 to 60 mils.  It can be used on pipelines that will operate at up to 65C (140F).  

     If you have questions - or would like some pricing information - please reach out at your earliest convenience!  steve@jsicoatings.com    936/321-3333