Spraying Powercrete Epoxy (R65/F1)
Powercrete R65/F1 400ml Cartridges
A beautiful coat of Powercrete R65/F1 being sprayed onto the pipe. |
Powercrete R65/F1 400ml Cartridge - ready to spray! |
Powercrete R65/F1 is available to spray using 400ml cartridges (that is 400ml of material per cartridge). Offering the same technical properties as the hand applied R65/F1, this spray option offers lower labor costs and less waste than some hand applied kits.
Technically, Powercrete R65/F1 is a fast curing modified epoxy designed specifically for mainline and field joints coating on steel pipelines. It can also be used for pipeline rehabilitation. In addition, R65 is a 100% solids liquid epoxy coating with a fast cure time for effficient, user friendly applications. Powercrete F1 can be applied to bare steel, FBE, or other epoxies.
Sold in cartridges with a 1:1 ratio, Powercrete R65/F1 is applied onto a grit blasted pipe surface. The typical specified coating thickness required can range from 25 to 60 mils. It can be used on pipelines that will operate at up to 65C (140F).
If you have questions - or would like some pricing information - please reach out at your earliest convenience! steve@jsicoatings.com 936/321-3333
No comments:
New comments are not allowed.