Canusa K60 / Covalence WPCT 

Canusa K60 Shrink Sleeves

     Dating back a few years, the folks over at Canusa created one of the only new heat shrinkable products to be created in many years.  Canusa's K60 was essentially (this is my opinion) an attempt to make a lower cost, technically acceptable product.  In this case, to keep costs low, they utilized a thinner backing material.  Generally speaking, I think it was reasonably successful.

     The K60 pitch on the data sheet is this: 'designed for protection of buried and exposed pipelines operating at up to 60C.  K60 consists of a crosslinked polyolefin backing, coating with a technologically advanced corrosion protective adhesive, which effectively bonds to the steel substrate and common pipeline coatings including PE and FBE.  

     They go on to list these key features:

• sold as a one piece sleeve (in the Covalence world that is called a /UNI sleeve)
• supplied with either yellow or black backing (your choice)
• excellent cathodic disbondment results
• offers durable protection against abrasion and chemical attack
• lower preheat requirements
• available as bulk rolls as an option

     In the Covalence / Raychem world; our equivalent product is WPCT - rated for use at 140F.  WPCT utilizes a highly aggressive butyl mastic.  WPCT brings excellent adhesion, CD, peel, shear, etc.  

     I expect both are very good products.  My preference is probably the WPCT and the feature that brings it over the top for me is the thermal indicator (see an example of that HERE)

If you'd like to have a conversation about WPCT, K60 or any other pipeline coatings; please reach out - steve@jsicoatings.com    936/321-3333

Canusa Aqua-Shield FPK (High Expansion)

 Canusa FPK - Flange Protection Kit

Canusa's Flange Protection Kit

     Canusa has a high expansion, high recovery shrink sleeve material that is designed for provide corrosion protection and sealing of flanges and other high profile pipeline substrates.  The FPK (Canusa Flange Protection Kit) was yellow in color and could be used on a variety of different pipeline and flange dimensions.  The product has a roughly 60% shrink built into it.

     The material used to make the Flange Protection Kit can also be used to coat casings, bell and spigot joints and high profile couplings.

     As you may or may not know; Seal for Life purchased the Canusa product line a few years ago, making Canusa and Covalence/Raychem essentially "sister companies."  Recently, there has been a push to move Canusa FPK users toward Covalence FS (Flange Seal).  

     Flangeseal is a product that has a 66% shrink ratio.  In addition, Flangeseals utilize a very tough, fiber reinforced backing that brings excellent penetration resistance, impact resistance and bursting strength to the product.  All important qualities when coating something like a flange.  

     If I can answer further questions, or give you some pricing on a Flangeseal - please reach out immediately!  steve@jsicoatings.com   936/321-3333